Elevator Camera Buying Guide: 10 Things to Look for When Choosing an Elevator Camera System

Elevator cameras look simple, but an elevator is a hard place for video: the cab moves, the signal has to cross the hoistway, and the camera has to survive vandalism. Use this checklist to compare elevator video systems before you buy, whether you manage one building or a whole portfolio.
The 10-point elevator camera checklist guide:
1. Live HD video at 30 frames per second
Look for HD video at up to 30 fps. Lower frame rates make it hard to see what happened during an incident.
2. A stable signal while the cab is moving
The link must hold at every floor and at full speed. Ask the supplier how the system performs in buildings like yours and whether motors and cables interfere with the signal.
3. No new traveling cable
Running video through the traveling cable often means replacing it, which is slow and expensive. A wireless cab-to-hoistway link avoids that and keeps the elevator in service for longer.
4. Rated for your building height
Check the floors or travel distance the system supports. The VNO-5815PT kit, for example, is used in buildings of 200+ floors.
5. Works with your recorder and network
Make sure the system delivers standard network video your NVR or video management software can record, so you are not locked into one brand of camera.
6. A camera built for the cab
A vandal-resistant, wide-angle dome mounted in a corner covers the whole cab and the door. Good low-light performance matters in dim cabs.
7. Remote viewing
Security staff, property managers, and responders should be able to view live video from the security desk or remotely.
8. Room for audio and other devices
A link that carries standard network traffic can also carry two-way emergency audio, VoIP phones, and in-cab screens. That helps with the 2019 elevator code, which adds video and visual communication to emergency phones. Read our guide to the ASME A17.1-2019 elevator video requirement.
9. NDAA compliance and certifications
Government, hospital, and institutional buyers need NDAA Section 889-compliant equipment. Also look for FCC, Industry Canada, and UL listings.
10. Warranty, returns, and support
Compare warranty length, return terms, and whether you can reach technical support in your time zone. Elevator Video Systems offers a 3-year warranty and a 60-day return policy, with support from Burlington, Ontario.

Quick comparison: what to ask each supplier
Video quality: HD at up to 30 fps?
Signal path: wireless link or a new traveling cable?
Building height: How many floors is it rated for?
Recording: does it work with my NVR or VMS?
Compliance: NDAA, FCC, Industry Canada, UL?
Support: warranty length and support hours?
Frequently asked questions
What is the best type of camera for an elevator?
A wide-angle, vandal-resistant dome camera mounted in a top corner of the cab, so it sees the whole cab and the door.
Do elevator cameras need a new traveling cable?
Not with a wireless system. A transmitter on the cab sends video to a receiver in the hoistway, so the existing traveling cable stays in place.
How long does installation take?
A wireless elevator link is usually installed in under an hour per elevator.
Are wireless elevator cameras secure?
Choose a system that encrypts the video link and allows only authorized staff to view it.
Comparing elevator camera systems? Get a free quote or call 1-844-246-4646.






Comments